Home Generator Maintenance

Generator Maintenance

We Use Different Tyes Of Generator at Home, industries, to Produce Energy and to Maintain the long life of Generator we schedule Generator Maintenance after 2k,6k, Hour or Manual Suggestion.

Turbine to Generator Alignment

Gib-keys are first removed from fwd. and aft sides of the Generator Compartment. All the Generator leg bolts are should be unbolted....
Gas Turbine Labyrinths Clearances, Couplings Unbolting, Compressor Rotor

Gas Turbine Labyrinths Clearances, Couplings Unbolting, Compressor Rotor

After removing all bearing upper liners, labyrinths clearances w.r.t rotor surface are taken, by means of feeler...
Gas Turbine services and Major Inspection

Gas Turbine services and Major Inspection

Inspection In engineering activities inspection involves the measurements, tests and gauges applied to certain characteristics in regard to...
GasTurbine Shell Lifting, Bump Test, Exhaust Shell, Bearings

Gas Turbine Shell Lifting, Bump Test, Exhaust Shell, Bearings

All the radial and horizontal bolts, of the turbine upper half, are removed. The first stage nozzle ring locking pin is removed...
Supercharger Vs Turbocharger

Supercharger Vs Turbocharger

Superchargers are basically air compressors that give more oxygen to your engine so it can make more power. Difference Between Supercharger Vs Turbocharger Technically Turbocharger is...
Turbine Rotor, Compressor Rotor Coupling Engagement Installation

Turbine Rotor, Compressor Rotor Coupling Engagement Installation

Load coupling shaft should be at the Generator side before installation of the turbine rotor. This will make a sufficient room for...